Grind Booth

Product Information

Application:

Utilizing a three stage High Efficiency Particulate Air (HEPA) filtration system, the HEPA grinding booth is designed to virtually eliminate dust created in the grinding stages of manufacturing, creating a healthier and more environmentally friendly work place.
The HEPA Grinding Booth is designed to meet the needs of mid-sized operations. The booth is completely self-contained, allowing no air to exit the building, thus keeping heated or air conditioned air inside your plant. During operation, grinding dust particles are drawn through a triple filtration system: a polyester filter blanket, a “wall” of D/L Cubes (bag filters), and finally a set of HEPA filters. A manometer on the system measures the efficiency of the unit and indicates when cleaning or a change of filters is required.

Features:

• Heavy duty sheet metal construction
• 3 phase 50/60Hz blower
• HEPA filtration system including three stage filter system
• Three fluorescent light assemblies
• Available in two different widths, and either with no doors, one door, or two doors

eg. a GF-14-7-8 spraybooth is 14 feet wide, seven feet tall, and eight feet deep.
Cat No. Description
12 Foot Width
163850 GP-12-7-8 HEPA Booth
14 Foot Width
163849 GP-14-7-8 HEPA Booth No Side Doors

Accessories:

1110512 Manometer (Draft Gauge)
111052 48’ Florescent Light F40-CW-WM
111341 Pre-Filter 20’ x 20’ x 1’
111343 Pocket Filter 20’ x 20’ x 12’
111344 HEPA Filter 20” x 20” x 12″
111345 HEPA Filter 24” x 24” x 12″
Crating
CEHEPABTH Crating — HEPA Grind Booth
Specifications:
Booth:
Height 90” outside, 84” inside, 140” top of filters
Width 156”/180” outside, 144”/168” inside
Depth 140”/152” overall, 96”/108” working area
Filters:
Pre filters: Two layer polyester, 53% efficient @ 10 micron or larger particle
Secondary filters: Multi layered matrix of synthetic fibers, 89.1% efficient @ 10 micron or larger particle size
HEPA filters: 99.5% efficient @ 1.5 micron or larger particle size.
Electrical:
Blower 208-230/460 volt, 3 phase, 60hz @ 15-13.5/6.8
amps
Lights 110v, 1 phase, 60Hz
Blower: Face velocity 147 fpm, 14,445 cfm @ 1” static pressure
Note: This equipment should be hardwired to an appropriate circuit by a qualifi ed electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.

Шлифовочная кабина

Product Information

Application:

Utilizing a three stage High Efficiency Particulate Air (HEPA) filtration system, the HEPA grinding booth is designed to virtually eliminate dust created in the grinding stages of manufacturing, creating a healthier and more environmentally friendly work place.
The HEPA Grinding Booth is designed to meet the needs of mid-sized operations. The booth is completely self-contained, allowing no air to exit the building, thus keeping heated or air conditioned air inside your plant. During operation, grinding dust particles are drawn through a triple filtration system: a polyester filter blanket, a “wall” of D/L Cubes (bag filters), and finally a set of HEPA filters. A manometer on the system measures the efficiency of the unit and indicates when cleaning or a change of filters is required.

Features:

• Heavy duty sheet metal construction
• 3 phase 50/60Hz blower
• HEPA filtration system including three stage filter system
• Three fluorescent light assemblies
• Available in two different widths, and either with no doors, one door, or two doors

eg. a GF-14-7-8 spraybooth is 14 feet wide, seven feet tall, and eight feet deep.
Cat No. Description
12 Foot Width
163850 GP-12-7-8 HEPA Booth
14 Foot Width
163849 GP-14-7-8 HEPA Booth No Side Doors

Accessories:

1110512 Manometer (Draft Gauge)
111052 48’ Florescent Light F40-CW-WM
111341 Pre-Filter 20’ x 20’ x 1’
111343 Pocket Filter 20’ x 20’ x 12’
111344 HEPA Filter 20” x 20” x 12″
111345 HEPA Filter 24” x 24” x 12″
Crating
CEHEPABTH Crating — HEPA Grind Booth
Specifications:
Booth:
Height 90” outside, 84” inside, 140” top of filters
Width 156”/180” outside, 144”/168” inside
Depth 140”/152” overall, 96”/108” working area
Filters:
Pre filters: Two layer polyester, 53% efficient @ 10 micron or larger particle
Secondary filters: Multi layered matrix of synthetic fibers, 89.1% efficient @ 10 micron or larger particle size
HEPA filters: 99.5% efficient @ 1.5 micron or larger particle size.
Electrical:
Blower 208-230/460 volt, 3 phase, 60hz @ 15-13.5/6.8
amps
Lights 110v, 1 phase, 60Hz
Blower: Face velocity 147 fpm, 14,445 cfm @ 1” static pressure
Note: This equipment should be hardwired to an appropriate circuit by a qualifi ed electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.