Карта сайта
Vacuum Mixer
Vacuum Mixer for Solid Surface
Product Information
Application:
The GS1000 vacuum mixer is designed to create solid surface material by evacuating air from the matrix during the blending process. Vacuum mixed materials can be fabricated to create seamless and durable products solid surface and (cultured stones) popular in today’s kitchen and bath industry.
Description:
The GS1000 vacuum mixer includes the following features, heavy duty steel construction, stainless steel mixing pot with an approximate capacity of 225lb., aluminum mixing vessel lid with replaceable seal, a heavy duty contoured stainless steel blade, and an oil less vacuum pump. The GS1000 vacuum mixer is available in either single or three phase and 50 or 60hz
Product Range:
111645 GS1000 vacuum mixer, 1Ø, 60hz 111650 GS1000 stainless steel mixing blade 111646 GS1000 vacuum mixer, 3Ø, 60hz 1116510 GS1000 pot lifter ring 111647 GS1000 vacuum mixer, 1Ø, 50hz 1116511 GS1000 pot lifter no ring 111648 GS1000 vacuum mixer, 3Ø, 50hz 111651 GS1000 pot lifter assembly 111649 GS1000 stainless steel mixing vessel
Equipment Requirements:
115 volt, 60 hertz mixers are equipped with power chord and plug for testing propose only. 220 volt, 60 hertz and all 50 hertz models are equipped with a power chord only and would require a plug to match service outlet for testing purposes only. Mixers should be hardwired to an appropriate 30 amp circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed o deem this t equipment operational will be obtained by buyer at buyers expense.
Specifications:
Electrical controls: Vacuum pump and mixer drive motors are classified as U.L. and CSA explosion proof and are pre-wired to control switches that are rated for use in hazardous areas. Power requirements: — 60 hertz: 115/230 volt 1Ø phase or 230/460v 3Ø. — 50 hertz: 110/220 volt 1Ø phase or 220/380/440v 3Ø Mixing Vessel: Material: Bottom — 10ga./3.4mm stainless steel domed tank head. Side — 16ga./1.6mm stainless steel. Specifications:Inside Dia. — 22” / 559 mm Inside depth — 18 ½” / 470 mm Mixing/total capacity -67/110 qt. Approximately 225lb. matrix capacity. Shipping weight — 48lb./22kgs. Shipping size — 30”x28”x18”/762mm x 711mm x 457mm Mixing vessel drive: 60 hertz 50 hertz — Input speed: 1725 rpm 1450 rpm — Reduction ratio: 25 to 1 20 to 1 — Output speed: 69 rpm 72.5 rpm — Output torque: 1141in.lb/992cm.kg 1087in.lb./945cm.kg. — Oil capacity: 1qt./.946L 1qt./.946L Mixing blade: — Material: 3/8”/10 mm stainless steel flatbar contoured to mixing vessel with 1¼”/32 mm i.d. x ¼” /6mm wall stainless steel hub. — Features: Quick release 3/8”/10 mm dia. stainless steel push button pin. — Specifications: Overall height — 18”/458 mm Overall width — 12”/305 mm Shipping weight — 10 lb./5 kg. Shipping size — 15”x6”x15”/381mm x 153mm x 381mm dia. stainless steel Mixing Vessel Lid: -Material: ¾”/19 mm thick x 25”/653mm dia. aluminum plate. Features: Utilizes a replaceable L-RTV rubber seal for pot rim. Vacuum Pump: Rotary vane, fan cooled and oil-less. Separate drive motor base mounted and coupled to pump. Includes muffler, filter, vacuum relief valve and vacuum gauge. Vacuum pump performance: 60 hertz — Metric-vacuum (mbar): Free air flow 10 m3/h at 200mbar — U.S./Imperial-vacuum (inch-hg): Free air flow 6cfm at 24“hg 50 hertz — Metric-vacuum (mbar): Free air flow 8 m3/h at 240mbar — U.S./Imperial-vacuum (inch-hg): Free air flow 5cfm at 23”hg
Вакуумный миксер
Вакуумный миксер для искусственного камня
Product Information
Application:
The GS1000 vacuum mixer is designed to create solid surface material by evacuating air from the matrix during the blending process. Vacuum mixed materials can be fabricated to create seamless and durable products popular in today’s kitchen and bath industry.
Description:
The GS1000 vacuum mixer includes the following features, heavy duty steel construction, stainless steel mixing pot with an approximate capacity of 225lb., aluminum mixing vessel lid with replaceable seal, a heavy duty contoured stainless steel blade, and an oil less vacuum pump. The GS1000 is available in either single or three phase and 50 or 60hz
Product Range:
111645 GS1000 vacuum mixer, 1Ø, 60hz
111650 GS1000 stainless steel mixing blade
111646 GS1000 vacuum mixer, 3Ø, 60hz
1116510 GS1000 pot lifter ring
111647 GS1000 vacuum mixer, 1Ø, 50hz
1116511 GS1000 pot lifter no ring
111648 GS1000 vacuum mixer, 3Ø, 50hz
111651 GS1000 pot lifter assembly
111649 GS1000 stainless steel mixing vessel
Equipment Requirements:
115 volt, 60 hertz mixers are equipped with power chord and plug for testing propose only. 220 volt, 60 hertz and all 50 hertz models are equipped with a power chord only and would require a plug to match service outlet for testing purposes only. Mixers should be hardwired to an appropriate 30 amp circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed o deem this t equipment operational will be obtained by buyer at buyers expense.
Specifications:
Electrical controls: Vacuum pump and mixer drive motors are classified as U.L. and CSA explosion proof and are pre-wired to control switches that are rated for use in hazardous areas.
Power requirements: — 60 hertz: 115/230 volt 1Ø phase or 230/460v 3Ø. — 50 hertz: 110/220 volt 1Ø phase or 220/380/440v 3Ø
Mixing Vessel: Material: Bottom — 10ga./3.4mm stainless steel domed tank head. Side — 16ga./1.6mm stainless steel.
Specifications:Inside Dia. — 22” / 559 mm Inside depth — 18 ½” / 470 mm Mixing/total capacity -67/110 qt. Approximately 225lb. matrix capacity. Shipping weight — 48lb./22kgs. Shipping size — 30”x28”x18”/762mm x 711mm x 457mm
Mixing vessel drive: 60 hertz 50 hertz — Input speed: 1725 rpm 1450 rpm — Reduction ratio: 25 to 1 20 to 1 — Output speed: 69 rpm 72.5 rpm — Output torque: 1141in.lb/992cm.kg 1087in.lb./945cm.kg. — Oil capacity: 1qt./.946L 1qt./.946L
Mixing blade: — Material: 3/8”/10 mm stainless steel flatbar contoured to mixing vessel with 1¼”/32 mm i.d. x ¼” /6mm wall stainless steel hub. — Features: Quick release 3/8”/10 mm dia. stainless steel push button pin. -
Specifications: Overall height — 18”/458 mm Overall width — 12”/305 mm Shipping weight — 10 lb./5 kg. Shipping size — 15”x6”x15”/381mm x 153mm x 381mm dia. stainless steel
Mixing Vessel Lid: -Material: ¾”/19 mm thick x 25”/653mm dia. aluminum plate. Features: Utilizes a replaceable L-RTV rubber seal for pot rim.
Vacuum Pump: Rotary vane, fan cooled and oil-less. Separate drive motor base mounted and coupled to pump. Includes muffler, filter, vacuum relief valve and vacuum gauge.
Vacuum pump performance:60 hertz — Metric-vacuum (mbar): Free air flow 10 m3/h at 200mbar — U.S./Imperial-vacuum (inch-hg): Free air flow 6cfm at 24“hg 50 hertz — Metric-vacuum (mbar): Free air flow 8 m3/h at 240mbar — U.S./Imperial-vacuum (inch-hg): Free air flow 5cfm at 23”hg
Globmarble llc. All rights reserved