Cultured Marble Blender 350 for marble and onyx batch production

Application:

The 350-lb. blender is a heavy -duty blender designed to thoroughly blend the components for marble and onyx batch production.

Description:

The 350 lb. Blender includes the 350 lb. mixing pot dolly and features heavy-duty steel construction, a stainless steel mixing pot with a 350 lb. capacity, a heavy -duty stainless steel blade. The 350# blender is available in either single or three phase, and 50 or 60 hertz. The 350 lb. mixing vessel dolly was designed to easily lift a filled to capacity mixing vessel and transport it to the casting area.

Product Range:

Equipment Requirements: All models are equipped with a power chord only and would require a plug to match service outlet for testing purposes only. Mixers should be hardwired to an appropriate circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.

Specifications:

Electrical controls: -

Motor: blender drive motor is classified as U.L. and CSA explosion proof and is rated for use in hazardous areas. -

Power requirements: 60 hertz: 115/208-230 volt single phase or 208-230/460 volt three phase. — 50 hertz: 110/220 volt single phase or 220/380/440 volt three phase.

Mixing vessel drive: 60 hertz 50 hertz Input speed: 1725 rpm 1425 rpm Reduction ratio: 30 to 1 30 to 1 Output speed: 57.5 rpm 47.5 rpm Output torque: 1524in. lb/ 1844in. lb/ 1324cm. kg. 1602cm. kg. Oil capacity: 1qt. 6oz./.946L 1qt. 6oz./.946L

Mixing Vessel: Material: Bottom — 11 ga. / 3.2mm stainless steel. Side — 16 ga. / 1.6mm stainless steel.

Specifications: Inside Dia. — 23 ½” / 597mm Inside depth — 18” / 457mm Mixing capacity — 88 qt. / 22 gl. / 83 liters. Shipping weight — 65 lb. / 30 kgs. Shipping size — 43”x27”x20”/1092mm x 686mm x 508mm

Mixing blade: Material: 3/8”/10mm thick x 2”/51mm wide stainless steel flatbar with 2”/51mm outside diameter nickel plated round tubing post.

Specifications: Overall height — 28” / 724 mm Overall width — 25” / 635 mm Shipping weight — 25 lb. / 55 kg. Shipping size — 25” x 19” x 9”/635mm x 483mm x 229mm 103501 350# Blender w/Dolly, 1Ø, 60hz 103504 350# S.S. mixing pot 103503 350# Blender w/Dolly, 3Ø, 60hz 103505 350# S.S. mixing blade 103511 350# Blender w/Dolly, 3Ø, 50hz 103506 100# pot for 350# blender 103513 350# Blender w/Dolly, 1Ø, 50hz 103527 350# Mixing pot lifter ring 0831034 New 350# S.S. steel mixing pot 103528 350# Pot lifter-no ring 103502 350# mixing pot dollly 103529 350# mix pot lifter assembly

Миксер для искусственного мрамора, оникса или гранита

Application:

The 350-lb. blender is a heavy -duty blender designed to thoroughly blend the components for marble and onyx batch production.

Description:

The 350 lb. Blender includes the 350 lb. mixing pot dolly and features heavy-duty steel construction, a stainless steel mixing pot with a 350 lb. capacity, a heavy -duty stainless steel blade. The 350# blender is available in either single or three phase, and 50 or 60 hertz. The 350 lb. mixing vessel dolly was designed to easily lift a filled to capacity mixing vessel and transport it to the casting area.

Product Range:

Equipment Requirements:All models are equipped with a power chord only and would require a plug to match service outlet for testing purposes only. Mixers should be hardwired to an appropriate circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.

Specifications:

Electrical controls: — Motor: blender drive motor is classified as U.L. and CSA explosion proof and is rated for use in hazardous areas. -

Power requirements: 60 hertz: 115/208-230 volt single phase or 208-230/460 volt three phase. — 50 hertz: 110/220 volt single phase or 220/380/440 volt three phase.

Mixing vessel drive: 60 hertz 50 hertz Input speed: 1725 rpm 1425 rpm Reduction ratio: 30 to 1 30 to 1 Output speed: 57.5 rpm 47.5 rpm Output torque: 1524in. lb/ 1844in. lb/ 1324cm. kg. 1602cm. kg. Oil capacity: 1qt. 6oz./.946L 1qt. 6oz./.946L

Mixing Vessel:

Material: Bottom — 11 ga. / 3.2mm stainless steel. Side — 16 ga. / 1.6mm stainless steel.

Specifications: Inside Dia. — 23 ½” / 597mm Inside depth — 18” / 457mm Mixing capacity — 88 qt. / 22 gl. / 83 liters. Shipping weight — 65 lb. / 30 kgs. Shipping size — 43”x27”x20”/1092mm x 686mm x 508mm

Mixing blade: Material: 3/8”/10mm thick x 2”/51mm wide stainless steel flatbar with 2”/51mm outside diameter nickel plated round tubing post.

Specifications: Overall height — 28” / 724 mm Overall width — 25” / 635 mm Shipping weight — 25 lb. / 55 kg. Shipping size — 25” x 19” x 9”/635mm x 483mm x 229mm 103501 350# Blender w/Dolly, 1Ø, 60hz 103504 350# S.S. mixing pot 103503 350# Blender w/Dolly, 3Ø, 60hz 103505 350# S.S. mixing blade 103511 350# Blender w/Dolly, 3Ø, 50hz 103506 100# pot for 350# blender 103513 350# Blender w/Dolly, 1Ø, 50hz 103527 350# Mixing pot lifter ring 0831034 New 350# S.S. steel mixing pot 103528 350# Pot lifter-no ring 103502 350# mixing pot dollly 103529 350# mix pot lifter assembly