Vacuum Mixer GS1700

Product Information

Application:

The GS1700 Vacuum Mixer is designed to mix solid surface material by evacuating air from the matrix during the blending process. Vacuum mixed materials can be fabricated to create seamless and durable products popular in today’s kitchen and bath industry.

Description:

The GS1700 vacuum mixer is the latest mixer in the Gruber line. The mixer features a powerful 3 hp motor and large capacity mixing vessel capable of mixing up to approximately 375 lbs. of solid surface matrix. The unit includes a stainless steel mixing pot with a domed bottom and domed lid assembly. The lid assembly is supported by a pneumatic cylinder that is used to raise and lower the lid assembly. When in the raised position, the lid assembly can be rotated away from the mixing pot to allow for unobstructed access. The GS1700 includes a pot lifter and ring for use with a hoist and gantry to assist in the pouring of matrix. The heavy-duty contoured stainless steel mixing blade is attached to the lid assem bly with a twist lock mechanism for quick blade removal and replacement. The GS1700 is available with a 230/460V 3? 50/60hz mixing motor and a 115/230V 1Ø 50/60hz vacuum pump motor.

Product Range:

170136 GS1700 Mixer, 3Ø, 60HZ No Vacuum 170314 GS1700 Pot Lifter 170136V GS1700 Vacuum Mixer, 3Ø, 60HZ 170316 GS1700 Pot Lifter Ring 170137V GS1700 Vacuum Mixer 3Ø, 50HZ 111095 M-60 Sub Micro Air Filter 162203 GS1700/1800 Vacuum Pumo Assy. 111096 M-60 Replacement Filter 162204 GS1700 Marble Mixer Blade 084043 R.T.V.-»L» Lid Seal Kit 162205 Poly Wiper Set GS1700 GS1800 170310 GS1700 S.S. Mixing Vessel 162248 Mixing Blade Solid Surface GS1700 170315 GS1700 Pot Lifter Assy Comp.

Equipment Requirements:

220V, 60hz and all 50hz models are equipped with a power chord only and would require a plug to match service outlet for testing purposes only. Mixers should be hardwired to an appropriate 30A circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.

Specifications:

Controls: — Integrated switch for motor on/off — Pneumatic control for raising/lowering lid assembly
Electrical: — Mixing motor — 50/60hz 230/460V 3Ø 10/5A @ 3hp — Vacuum pump – 50/60hz 115/230V 1Ø 8/4A @ ½hp
Air requirements: — 5cfm@80psi clean and dry
Mixing vessel drive: 60 hertz     50 hertz — Input speed: 1725 rpm 1425 rpm — Reduction ratio: 30 to 1 30 to 1 — Output speed: 57.5 rpm 47.5 rpm
Vacuum Pump: — Rotary vane, fan cooled and oil-less. Separate drive motor base mounted and coupled to pump. Includes muffler, filter, vacuum relief valve and vacuum gauge.
Mixing Vessel:
- Material: Bottom — 10ga/3.4mm S.S. domed tank head. Side — 16ga /1.6mm S.S.
- Specifications: Inside Dia. — 27”/685mm Inside depth -23”/584mm Mixing capacity — 130/210qt Approx. 375lb matrix.
Mixing blade: — Material: ½”/13mm x 3”/76mm S.S. flatbar contoured to mixing vessel with 1 5/8”/41mm i.d.x3/8”/10mm wall stainless steel hub. — Features: Quick release twist lock mechanism, Polyethylene wipers.
Mixing Vessel Lid: — Material: 10ga/3.4mm S.S. domed tank head — Features: Utilizes a replaceable L-RTV rubber seal for pot rim. Includes replaceable bearing with vacuum seal.


Вакуумный миксер GS1700

Product Information

Application:

The GS1700 Vacuum Mixer is designed to mix solid surface material by evacuating air from the matrix during the blending process. Vacuum mixed materials can be fabricated to create seamless and durable products popular in today’s kitchen and bath industry.

Description:

The GS1700 vacuum mixer is the latest mixer in the Gruber line. The mixer features a powerful 3 hp motor and large capacity mixing vessel capable of mixing up to approximately 375 lbs. of solid surface matrix. The unit includes a stainless steel mixing pot with a domed bottom and domed lid assembly. The lid assembly is supported by a pneumatic cylinder that is used to raise and lower the lid assembly. When in the raised position, the lid assembly can be rotated away from the mixing pot to allow for unobstructed access. The GS1700 includes a pot lifter and ring for use with a hoist and gantry to assist in the pouring of matrix. The heavy-duty contoured stainless steel mixing blade is attached to the lid assem bly with a twist lock mechanism for quick blade removal and replacement. The GS1700 is available with a 230/460V 3? 50/60hz mixing motor and a 115/230V 1Ø 50/60hz vacuum pump motor.

Product Range:

170136 GS1700 Mixer, 3Ø, 60HZ No Vacuum 170314 GS1700 Pot Lifter 170136V GS1700 Vacuum Mixer, 3Ø, 60HZ 170316 GS1700 Pot Lifter Ring 170137V GS1700 Vacuum Mixer 3Ø, 50HZ 111095 M-60 Sub Micro Air Filter 162203 GS1700/1800 Vacuum Pumo Assy. 111096 M-60 Replacement Filter 162204 GS1700 Marble Mixer Blade 084043 R.T.V.-»L» Lid Seal Kit 162205 Poly Wiper Set GS1700 GS1800 170310 GS1700 S.S. Mixing Vessel 162248 Mixing Blade Solid Surface GS1700 170315 GS1700 Pot Lifter Assy Comp.

Equipment Requirements:

220V, 60hz and all 50hz models are equipped with a power chord only and would require a plug to match service outlet for testing purposes only. Mixers should be hardwired to an appropriate 30A circuit by a qualified electrician to meet your local electrical codes. Additional controls may be necessary to meet your local regulations. Any additional requirements needed to deem this equipment operational will be obtained by buyer at buyers expense.

Specifications:

Controls: — Integrated switch for motor on/off — Pneumatic control for raising/lowering lid assembly

Electrical: — Mixing motor — 50/60hz 230/460V 3Ø 10/5A @ 3hp — Vacuum pump – 50/60hz 115/230V 1Ø 8/4A @ ½hp

Air requirements: — 5cfm@80psi clean and dry

Mixing vessel drive: 60 hertz 50 hertz — Input speed: 1725 rpm 1425 rpm — Reduction ratio: 30 to 1 30 to 1 — Output speed: 57.5 rpm 47.5 rpm

Vacuum Pump: — Rotary vane, fan cooled and oil-less. Separate drive motor base mounted and coupled to pump. Includes muffler, filter, vacuum relief valve and vacuum gauge.

Mixing Vessel:

— Material: Bottom — 10ga/3.4mm S.S. domed tank head. Side — 16ga /1.6mm S.S.

- Specifications: Inside Dia. — 27”/685mm Inside depth -23”/584mm Mixing capacity — 130/210qt Approx. 375lb matrix.

Mixing blade: — Material: ½”/13mm x 3”/76mm S.S. flatbar contoured to mixing vessel with 1 5/8”/41mm i.d.x3/8”/10mm wall stainless steel hub. — Features: Quick release twist lock mechanism, Polyethylene wipers.

Mixing Vessel Lid: — Material: 10ga/3.4mm S.S. domed tank head — Features: Utilizes a replaceable L-RTV rubber seal for pot rim. Includes replaceable bearing with vacuum seal.